![](\"https:\/\/www.hausming.com\/wp-content\/uploads\/2026\/05\/00000000000.jpg\")
<\/span><\/figure><\/div>\n\n\n\nA normally operating crushing production line should have stable and controllable electricity costs. However, in reality, material blockages, stalling, idling, improper clearances, excessive wear on wear parts, poor lubrication, belt slippage\u2026 every small problem is secretly consuming electricity.<\/p>\n\n\n\n
To give a very intuitive example: Severe wear of the jaw plates\/liners reduces the biting capacity, requiring repeated crushing, causing the current to surge by 20%\u201340%. For the same output, power consumption increases dramatically. Improper gap adjustment leads to poor discharge and material circulation, causing the equipment to operate under high load for extended periods, consuming tens of kilowatt-hours more per hour. Lubrication failure and increased bearing resistance force the motor to be overloaded, resulting in artificially high power consumption without improving efficiency. Even slight belt slippage can reduce output and increase power consumption; the lower the output, the higher the unit electricity cost.<\/p>\n\n\n\n
The real way to save on electricity costs isn’t to reduce machine usage, but to operate equipment with “light load and high efficiency”: Replace wear-resistant parts promptly to maintain optimal crushing performance; regularly adjust clearances, tighten belts, and ensure stable feeding to avoid unnecessary work; maintain bearings and hydraulic systems properly to reduce operating resistance; and stock up on vulnerable parts in advance to avoid operating with defects and high consumption with low efficiency. Many customers have found that spending a few thousand yuan more each month on maintenance and stocking up can actually save tens of thousands of yuan in electricity costs, while increasing output by 10%\u201320%. This is far more cost-effective than simply “saving electricity.”<\/p>\n\n\n\n
Hausming focuses on optimizing crushing production lines, providing one-stop service from equipment debugging, wear-resistant part selection, and clearance adjustment to daily operation and maintenance, helping you reduce electricity consumption and increase capacity. Minimizing unnecessary electricity costs and maximizing stable profits is the key to efficient mine operation!<\/p>\n\n\n\n
<\/p>","protected":false},"excerpt":{"rendered":"
Many mine owners complain that despite running their equipment at full capacity and not significantly increasing output, their electricity bills exceed their limits every month. Everyone assumes it’s due to the motor’s high power consumption or expensive fuel, but few realize that the root cause of the high electricity bills often lies not in the […]<\/p>\n","protected":false},"author":1,"featured_media":3090,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[48],"tags":[],"class_list":["post-3086","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-technical-article"],"jetpack_featured_media_url":"https:\/\/www.hausming.com\/wp-content\/uploads\/2026\/05\/00000000000.jpg","jetpack_sharing_enabled":true,"jetpack-related-posts":[{"id":3065,"url":"https:\/\/www.hausming.com\/de\/2026\/04\/30\/common-fault-diagnosis-and-solutions-for-multi-cylinder-cone-crushers%ef%bc%81\/","url_meta":{"origin":3086,"position":0},"title":"Common fault diagnosis and solutions for multi-cylinder cone crushers\uff01","author":"cuicong","date":"2026\u5e744\u670830\u65e5","format":false,"excerpt":"In crushing production lines for mines, sand and gravel aggregates, etc., the cone crusher serves as the core equipment for medium and fine crushing. Its stable operation directly determines the productivity and efficiency of the entire production line. However, during long-term high-load operations, equipment is inevitably prone to various malfunctions,\u2026","rel":"","context":"In "technical article"","block_context":{"text":"technical article","link":"https:\/\/www.hausming.com\/de\/category\/technical-article\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.hausming.com\/wp-content\/uploads\/2026\/04\/12-3.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.hausming.com\/wp-content\/uploads\/2026\/04\/12-3.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.hausming.com\/wp-content\/uploads\/2026\/04\/12-3.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/www.hausming.com\/wp-content\/uploads\/2026\/04\/12-3.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/www.hausming.com\/wp-content\/uploads\/2026\/04\/12-3.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/www.hausming.com\/wp-content\/uploads\/2026\/04\/12-3.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":3177,"url":"https:\/\/www.hausming.com\/de\/2026\/05\/09\/equipping-silos-with-eyes-an-analysis-of-the-application-of-level-gauges-in-the-mining-and-crushing-field\/","url_meta":{"origin":3086,"position":1},"title":"Equipping silos with “eyes”: An analysis of the application of level gauges in the mining and crushing field.","author":"cuicong","date":"2026\u5e745\u67089\u65e5","format":false,"excerpt":"In a mining crushing production line, monitoring the material level in the silos and crushers is a seemingly simple yet crucial step. Proper material level control ensures a smooth and efficient production line; errors can lead to equipment \"stockpiling\" and shutdowns, or even damage to the crushing equipment and disrupt\u2026","rel":"","context":"In "technical article"","block_context":{"text":"technical article","link":"https:\/\/www.hausming.com\/de\/category\/technical-article\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.hausming.com\/wp-content\/uploads\/2026\/05\/000-scaled.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.hausming.com\/wp-content\/uploads\/2026\/05\/000-scaled.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.hausming.com\/wp-content\/uploads\/2026\/05\/000-scaled.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/www.hausming.com\/wp-content\/uploads\/2026\/05\/000-scaled.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/www.hausming.com\/wp-content\/uploads\/2026\/05\/000-scaled.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/www.hausming.com\/wp-content\/uploads\/2026\/05\/000-scaled.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.hausming.com\/de\/wp-json\/wp\/v2\/posts\/3086","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hausming.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.hausming.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.hausming.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hausming.com\/de\/wp-json\/wp\/v2\/comments?post=3086"}],"version-history":[{"count":3,"href":"https:\/\/www.hausming.com\/de\/wp-json\/wp\/v2\/posts\/3086\/revisions"}],"predecessor-version":[{"id":3091,"href":"https:\/\/www.hausming.com\/de\/wp-json\/wp\/v2\/posts\/3086\/revisions\/3091"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.hausming.com\/de\/wp-json\/wp\/v2\/media\/3090"}],"wp:attachment":[{"href":"https:\/\/www.hausming.com\/de\/wp-json\/wp\/v2\/media?parent=3086"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.hausming.com\/de\/wp-json\/wp\/v2\/categories?post=3086"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.hausming.com\/de\/wp-json\/wp\/v2\/tags?post=3086"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}